This tracker has no independent power supply. To operate it you need to connect it to the car battery. The needed voltage is 9 to 24 V DC. With it you can remotely control one of the relays in the vehicle (such as the one of the fuel pump). When you submit a command by SMS the tracker will turn off the fuel pump and it will stop the car. This device is placed completely waterproof case, which which keeps the built-in GPS and GSM antennas. This tracker has a vibration sensor that will alert you when the engine is started.
This tracker is equipped with waterproof case and its degree of protection is IP56, which protects it from moisture and rain splash. With magnets on it you can easily mount it on the car body. This unit transmits location information via SMS or Web-based platform using mobile Internet (2G GPRS). Setting up all the parameters for the normal operation of the tracker is done via SMS sent to the card in it. You have the option to set the authorized phone number, APN setup, time zone, IP address of the server, turn on and off alarms, etc. If you want to see the location of the car just dial the SIM card number that is in the tracker. After the third ring the device will automatically disconnect and you will receive SMS with a link to a map with the location and information about the status of the battery. For real time tracking, and history of the routes have a free platform that receives data from tracker by GPRS. There you can view the routes in three-day intervals, and the information is kept up to 6 months. With the platform you can have real time information for the condition of the car (in motion, stopped, parked) to view alarms for traffic speeding, leaving the defined perimeter, battery status, etc.
With the compact GPS tracker you will get information on the location of the vehicle. With SMS connection you can either get the coordinates or a direct link to Google Maps. You can also see the history of the route. (tracker comes with no available Web-based platform) strong> The device has quad-band GPS Module - 850/900/1800/1900 MHz, built-in GPS and GSM antennas and a wide range of supply voltage - 9 -36 V DC. The tracker has a vibration sensor and detector for starting the engine. In the box you will find a switch with which you can control the fuel supply to the fuel pump. For the safe fuel control this works only when vehicle is stationary. If you issue such a command the fuel pump is turned off only when the engine is turned off or when the speed is 0 km/h
The tracker is suitable for any moped, scooter and motorbike with battery voltage 12V. It can act as an alarm system to prevent the thief to start the engine of the vehicle and to trigger the powerful 125 dB alarm, but if this protection is overcome you can find the location using the aGPS system. The device has a management module which hosts the alarm, tracker, headlights, relays, etc. With the remote control, you can turn the alarm on and off, to adjust the vibration sensor, to stop the power supply or to get the bike to show you its location with sound and light signals. For your convenience we included in the kit two remotes. Vehicle tracking is done either by getting a link to the location or via the free web-based platform.